ChemicalBook > CAS DataBase List > COPPER(II) OLEATE

COPPER(II) OLEATE

Product Name
COPPER(II) OLEATE
CAS No.
1120-44-1
Chemical Name
COPPER(II) OLEATE
Synonyms
Cuprex;Nsc112237;CUPRIC OLEATE;COPPER OLEATE;copperdioleate;copper(2++)salt;COPPER(II) OLEATE;Oleic acid copper;copper oleate(1120-44-1);COPPERCIS-9-OCTADECENOATE
CBNumber
CB6174813
Molecular Formula
C18H34CuO2
Formula Weight
346.01
MOL File
1120-44-1.mol
More
Less

COPPER(II) OLEATE Property

Boiling point:
211.9℃[at 101 325 Pa]
Density 
971[at 20℃]
vapor pressure 
0.616Pa at 20℃
solubility 
insoluble in H2O; slightly soluble in ethanol; soluble in ethyl ether
form 
blue-green solid
color 
blue-green
Water Solubility 
insoluble H2O; slightly soluble alcohol; soluble ether [MER06]
Dielectric constant
2.8(20℃)
LogP
14.74 at 25℃
EPA Substance Registry System
Cupric oleate (1120-44-1)
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Warning
Hazard statements

H315Causes skin irritation

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P272Contaminated work clothing should not be allowed out of the workplace.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P321Specific treatment (see … on this label).

P332+P313IF SKIN irritation occurs: Get medical advice/attention.

P333+P313IF SKIN irritation or rash occurs: Get medical advice/attention.

P362Take off contaminated clothing and wash before reuse.

P363Wash contaminated clothing before reuse.

P501Dispose of contents/container to..…

More
Less

N-Bromosuccinimide Price

American Custom Chemicals Corporation
Product number
CHM0290339
Product name
COPPER OLEATE
Purity
98.00%
Packaging
500G
Price
$4799.03
Updated
2021/12/16
AHH
Product number
MT-06829
Product name
Copperoleate
Purity
98%
Packaging
500g
Price
$555
Updated
2021/12/16
More
Less

COPPER(II) OLEATE Chemical Properties,Usage,Production

Chemical Properties

Copper(II) oleate is a blue to green solid; can be prepared by reacting the acid with CuO or basic carbonate of Cu; coalesces mercury drops; improves oil combustion by reducing smoke and fumes of burning oil; used as textile fungicide, used in antifouling marine paints [MER06].

Uses

In antifouling compositions; as emulsifier and dispersing agent; as antioxidant in lubricating oils; as combustion-improver in fuel oils; as stabilizer for amide polymers; as catalyst.

Preparation

Copper(II) oleate is produced by the precipitation reaction of copper(II) sulfate solutions with sodium oleate. It is insoluble in water. The product of commerce contains between 6% and 9% copper. Copper(II) oleate is used as an emulsifier and dispersant for the control of mildew and as a combustion improver in fuel oils.

Flammability and Explosibility

Not classified

Synthesis

The electrolysis system consisted of a Cu foil (3x1 cm, 0.1 cm thickness) as the anode and graphite rod (6.5 mm diameter, Johnson Matthey Chemicals Ltd.) as the cathode in the presence of ammonium acetate (CH3COONH4) as the supporting electrolyte solution. Prior to synthesis, both anode and cathode were rinsed with distilled water and small amount of acetone to remove any trace organic materials on their surface. A DC power supply (TTi PSU Bench CPX400A) was used throughout the electrochemical synthesis. The acid solution (in ethanol) was mixed with CH3COONH4 solution with the ratio of 1:1 into the electrochemical cell. The electrochemical cell used was a simple and undivided cell with the capacity of 100mL. The reaction was performed at room temperature (~27°C) for 4 hours. Strong stirring (900 rpm) was kept throughout the synthesis process. The resulting complex in blue precipitate was then filtered and washed with distilled water and ethanol to remove the impurities. The precipitate was then dried in a desiccator for 24 hours. Copper(II) oleate can be obtained.

Purification Methods

Crystallise it from diethyl ether. [Beilstein 2 H 465, 2 I 196, 2 I202, 2 II 436, 2 III 1404, 2 IV 1646.]

Toxicity evaluation

Toxicity of Copper(II) oleate was demonstrate in experiments on S.mansoni cercariae. 1 mL of Copper(II) oleate (20% in ether) was put in a tet tube containing 10 mL of aerated tap water. Test tubes were allowed to stand for 30 minutes with occasional shaking. The water was then poured off and filtered. 1 mL of filtrate from each tube was placed in a separate Syracuse watch glass. Water saturated with copper oleate killed all the cercariae in 30 minutes.

COPPER(II) OLEATE Preparation Products And Raw materials

Raw materials

Preparation Products

More
Less

View Lastest Price from COPPER(II) OLEATE manufacturers

WUXI HONOR SHINE CHEMICAL CO.,LTD
Product
copper oleate 1120-44-1
Price
US $0.00/Kg/Drum
Min. Order
1Kg/Drum
Purity
63%
Supply Ability
300tons
Release date
2022-01-06
Shaanxi Dideu Medichem Co. Ltd
Product
COPPER(II) OLEATE 1120-44-1
Price
US $0.00-0.00/Kg
Min. Order
1KG
Purity
99.0%+
Supply Ability
100 tons
Release date
2020-01-14

1120-44-1, COPPER(II) OLEATERelated Search:


  • 9-Octadecenoicacid(Z)-,copper(2+)salt
  • copper(2++)salt
  • copperdioleate
  • COPPER(II) OLEATE
  • COPPER OLEATE
  • CUPRIC OLEATE
  • (Z)-9-Octadecenoicacidcopper(II)salt
  • Cupricoleate=Copper(II)oleate
  • Cuprex
  • 9-Octadecenoic acid (9Z)-, copper(2+) salt
  • COPPERCIS-9-OCTADECENOATE
  • Bis[(Z)-9-octadecenoic acid] copper(II) salt
  • Bisoleic acid copper(II) salt
  • cis-9-Octadecenoic acid, copper salt
  • Copper oleate (cu(o2C18H33)2)
  • Copper oleate cu(o2C18H33)2
  • Nsc112237
  • Oleic acid, copper ii salt
  • copper oleate(1120-44-1)
  • Oleic acid copper
  • 1120-44-1
  • C36H66CuO4
  • Organic-metal salt